Microsoft LAN Manager Client for OS/2 op VPC
Welcome!
Congratulations on your purchase of IBM OS/2 Warp Connect.
OS/2 Warp Connect contains OS/2 Warp Version 3 *, BonusPak,
and the following powerful networking products:
- IBM Peer for OS/2
- IBM LAN Requester 4.0
- Novell NetWare Client 2.11 for OS/2
- IBM TCP/IP for OS/2 3.0
- IBM LAN Distance Remote 1.11
- IBM Network SignON Coordinator/2 1.20
The following panels guide you through the installation of
OS/2 Warp and networking products.
* "OS/2 Warp" or "Operating System/2 Version 3" or "Operating System/2"
references throughout these programs refer to the OS/2 Warp Version 3
Operating System product, which is included in OS/2 Warp Connect, plus
the BonusPak, plus IBM and other networking products.
Installing OS/2 Warp Connect
Welcome to OS/2!
Use the cursor keys to select an installation method and press Enter.
Press F1 for more information.
1. Easy Installation
- Non-technical users; simple install of OS/2 Warp on drive C
- You choose IBM Peer for OS/2 (includes access to IBM LAN Servers)
- You choose Novell NetWare Client for OS/2
- You choose Internet access using your modem
2. Advanced Installation
- Experienced technical users; installs OS/2 Warp to any available drive
- You choose additional options such as formatting your drive
- You can also choose:
IBM Peer for OS/2 or IBM LAN Requester
Novell NetWare Client for OS/2
IBM LAN Distance Remote
IBM TCP/IP for OS/2 (includes Internet access)
- You specify additional setup and configuration options
NETBEUI: Using a 32-bit data segment.
IBM OS/2 TCPBEUI 1.00
TCPBEUI: Using a 32-bit data segment.
IBM OS/2 NETBIOS 4.0
Adapter 0 has 225 NCBs, 130 sessions, and 21 names available to NETBIOS applications.
Adapter 1 has 225 NCBs, 130 sessions, and 21 names available to NETBIOS applications.
NETBIOS 4.0 is loaded and operational.
Intel(R) PRO/100 Network Connection Driver v4.48 041103
Copyright 1995-2003, Intel Corporation. All Rights Reserved.
Error: Unable to locate the NIC.
The following are possible causes:
1. The system may not support the PCI bus.
2. The NIC may not be properly installed in a slot.
3. Some of the NIC resources in configuration space may be invalid.
Check for possible errors listed above and run diagnostics.
Failure: Driver did not load, NDIS environment invalid.
SYS1201: The device driver C:\IBMCOM\MACS\E100B.OS2 specified in the DEVICE statement on line 99 of the CONFIG.SYS file was not installed. Line 99 is ignored.
Press Enter to continue...